Cars / Vans · ECU Remapping
Audi TTS 2.0T FSI 320 bhp Tuning (2020–present)
Factory specification and Stage 1 remap gains for the Audi TTS 2.0T FSI 320 bhp (2020–present). A Stage 1 calibration adds 73 BHP and 124 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 |
|---|---|---|
Power BHP | 320 | 393 +73 BHP · +23% |
Torque Nm | 420 | 544 +124 Nm · +30% |
+73 BHP
Stage 1 power gain
+124 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 320 bhp · 420 Nm (peak)
Stage 1: 393 bhp · 544 Nm (peak)
Tuning tool compatibility
This ECU is listed in 3 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: SIMOS196
Alientech KESS3
Supported
ECU: SIMOS196
Magicmotorsport FLEX
Supported
ECU: SIMOS196
Dimsport New Genius / New Trasdata
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Audi TTS 2.0T FSI 320 bhp Stage 1 — what changes
The Audi TTS 2.0T FSI 320 bhp (2020–present) leaves the factory at 320 BHP and 420 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.0T FSI 320 bhp powertrain (petrol). The result is 393 BHP and 544 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Audi TTS 2.0T FSI 320 bhp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.0T FSI 320 bhp to 393 BHP and 544 Nm — a gain of 73 BHP and 124 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Audi TTS's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.